Plant transportScania 8×2 rear-steer beavertail, 32 t gross vehicle weight with a 14-tonne payload: tracked and wheeled plant up to the 13–14 tonne class travels on the bed, with low-loader transport arranged for heavier machines.
- Site to site, yard to site, dealer collections
- Same-day moves within the three-hour delivery radius
- Mini plant and attachments on the trailer
Crane liftingPalfinger PK 40002 EH High Performance knuckle-boom crane on the beavertail, for placing cabins, tanks, trusses, steel and plant: 13.9 t close in, 3.9 t at 9.5 m.
- Contract lift or crane hire with operator
- Lift plans and RAMS prepared
- Cabin, generator and fuel cube placement
Muck away and aggregatesDumpers and hook-lift movements for spoil removal to licensed facilities and stone, sand and fill delivery back to site, coordinated with the excavator programme.
- Interchangeable hook-lift bodies
- Licensed disposal, documented
- Imported stone and hardcore
Crane specification · Palfinger PK 40002 EH · version B
What the crane can lift
Manufacturer's European figures for the PK 40002 EH High Performance in its two-extension (B) configuration, as fitted to our Scania. Capacity falls as the boom reaches further out; the load chart below gives the maximum at each outreach.
39.3 tmMax lifting moment (385.5 kNm)
13.9 tMax lifting capacity, close to the column
9.5 mMax hydraulic outreach (3,900 kg)
EndlessSlewing, 7.4 m stabiliser spread
32 tGross vehicle weight, Scania 8×2 rear-steer
18 tUnladen weight, crane and beavertail fitted
14 tPayload on the bed
13–14 tMachine class carried; heavier plant by low-loader
| Outreach | Close in | 4.1 m | 5.8 m | 7.6 m | 9.5 m |
|---|
| Lifting capacity | 13,900 kg | 9,100 kg | 6,400 kg | 4,850 kg | 3,900 kg |
Typical lifts: a 32 ft site office (about 3.5 t) at the full 9.5 m; a full 2,000 L fuel cube (about 2.4 t) anywhere in reach; a 3-tonne mini excavator on and off the bed; the ZX135US-6 (about 13.5 t) drives on and off under its own power. Anything heavier is planned closer to the column. Every lift is planned against the load chart for the outreach and slew required, with the crane's stabilisers fully deployed. Source: Palfinger PK 40002 EH High Performance European data sheet, version B.
Excavator
